Cameras and peripherals

The 1.75″ Aluminum Mast is a replacement part for the mast in the Camera Mount System or Tripod System. Kit Includes: 1.75″ Aluminum Mast (black anodized)

The Ultimate Mobile Digital Tech Package for Tethering, Data Management, Laptop and Equipment Storage.

The 1535 Pro Ultra Kit is a portable and ruggedized digital photographic workstation that is configured with our top-tier DigiSystem products. Based on the DigiPlate Pro tethering plate and housed in our waterproof 1535 DigiCase Pro, the 1535 Pro Ultra Kit is in a league of its own. There is no other 1-case solution in the marketplace that gives you the ability to travel with both a full DSLR camera setup and laptop computer system.

Kit Includes: 1535 DigiCase Pro with TrekPak | DigiPlate Pro | DigiClamps – Laptop Universal | DigiClamps – Accessory Universal | DigiShade Pro | DigiMouse Pad | DigiLegs | DigiBase.

Add a 5/8 In. baby pin to any existing 1.75″ Aluminum Mast found in our camera mount or tripod systems with our 5/8 Baby Mast Adapter. This simple upgrade attaches a height adjustable 5/8 baby pin on the top of the 1.75″ Aluminum Mast.

Requires: 1.75 In. Mast

Kit Includes: Black Aluminum Collar, 2nd Stage Riser w/Spud Mount, Mounting Hardware.

*2nd stage riser ONLY. This item does NOT include a 1.75″ Aluminum Mast.

The AXIS Camera Mount System uses our AXIS Camera Mount Brackets, an aluminum mast 1.75 In. in diameter, and the INOVATIV Horseshoe Plate. The System is height adjustable and the INOVATIV Horseshoe Plate can rotate 360° or rise and fall along the 1.75 In. aluminum mast. The AXIS Camera Mount System can mount to any pole 2 In. in diameter.

Kit Includes: AXIS Camera Mount Brackets | 1.75 In. Mast | Horseshoe Plate

All Kits Include: Dual Bar Bracket & 2 Convi Clamps

The AXIS Dual Bar gives you the ability to easily mount 2 monitors. The AXIS Dual Bar can easily be attached to an AXIS Stand, C-Stand, rolling stand, or anything up to 2″ in diameter.

An add-on accessory for the Dual Bar the AXIS Small Hook is the perfect accessory for keeping cables organized or other items nearby and off of the floor. The AXIS Small Hook is machined from 6061 T6 aluminum and anodized black with INOVATIV’s triple anodized mil-spec process.

The WorkSurface Pro is a one-of-a-kind workstation. Coupled with our unique and Patent Pending vDrop System, the WorkSurface Pro can be mounted to pole that is up to 2 In. in diameter.

All WorkSurface Pro Kits Include: WorkSurface Pro | vDrop Mount | 2 Convi Clamps

The Insight’s Baby Pin Attachment connects to the Insight’s System Bracket. The height position may be adjusted on the 6 threaded holes of the System Bracket.

The baby pin is commonly utilized to wireless receivers, wireless transmitters, antennas and other accessories that connect to a baby pin.

Kit Includes: Baby Pin Attachment, Baby Pin with ⅜ In. thread, Mounting Hardware

Do you have an AXIS Dual Bar and need to off-set mount a wireless receiver, wireless transmitter, antenna, or other baby pin mounted accessory? The AXIS Baby Pin Bracket with Pin provides an off-set of 3.5 In. from the AXIS Dual Bar.

With 16 locations on the AXIS Dual Bar where the AXIS Baby Pin Bracket with Pin can be connected, you will have plenty of options for mounting your equipment.

The Corner Plug with Baby Pin fits seamlessly into any of the 4 upright posts of the Apollo. Due to the Apollo’s Corner-Cam Lock System design, the Corner Plug fits into the top shelf corners, staying clear of the cart’s working area.

You can quickly mount a variety of items that have a 5/8 In. baby pin receiver. Coupled with the Digibase, this is also a very useful tool to mount our Digiplates, Pro Monitor Mounts, or even lights!

Note, this accessory is compatible only with Apollo, Deploy, & Center Mast Bracket.

This is a 5/8 In. Baby Pin System that clamps to any of the carts 4 upright post using our Overtube Style design, so you don’t have to remove the top shelf to install it. Mount anything up to 30 lbs in weight with a 5/8″ mount.

Compatible with our DigiBase and Pro Monitor Mount, you can secure our Digiplate Pro, any monitor with a VESA plate, even lights! Rods come in 33 In. length and are black anodized.

Kit Includes: Rod w/Spud Mount, Pair Baby Pin Clamps, Mounting Hardware.

The BOA Monitor Mount System comes with a factory pre-tensioned articulated head, making it easy to move large monitors, or even large computers like the 27 In. iMac, to a proper ergonomic location.

The BOA system mounts to any INOVATIV cart using the Monitor Arm Clamps included in the system. Once the system is mounted, the BOA arm will rise and fall effortlessly on the mast to accommodate different eye heights, along with rotating and articulating the monitor in different positions.