Cameras and peripherals

Active filters

  • Categories: Battery, Chargers and Adapters
  • Categories: cameras
  • Categories: Cart workstations accessories
  • Categories: PTZ cameras
Inovativ DigiBracket Tripod Mount
$205.00
Product available for orders

The DigiBracket connects the DigiPlate Pro and DigiPlate Lite directly to the legs of your tripod. Machined from strong and lightweight 6061 aluminum, the bracket keeps your laptop secured and close to camera when you are working solo.

Kit Includes: DigiBracket | One 3/8-16 x 0.5 In. Socket Cap Screw | 2 Pieces of 2 In. x 10.5 In. Black Gaffer’s Tape

Buy
Details
Add to cart
View details  
Inovativ DigiPlate Pro
$435.00
Product available for orders

The DigiPlate Pro is the foundation of all DigiSystem products. It is based on the tried and true “cheese plate” design used by professional photographers and cinematographers. With 161 holes tapped with the very common 3/8-16 thread size, the DigiPlate Pro is virtually limitless when it comes to expandability. All accessories are sold separately or by the kit. The DigiPlate Pro comes with one 3/8-16 to 1/4-20 step-down bushing to work seamlessly with tripods or tripod plates that use a 1/4-20 sized bolt.

Kit Includes: DigiPlate Pro | 3/8-16 to 1/4-20 step-down bushing | Instructions

Buy
Details
Add to cart
View details  
Inovativ 1535 Pro Ultra Kit
$2,140.00
Product available for orders

The Ultimate Mobile Digital Tech Package for Tethering, Data Management, Laptop and Equipment Storage.

The 1535 Pro Ultra Kit is a portable and ruggedized digital photographic workstation that is configured with our top-tier DigiSystem products. Based on the DigiPlate Pro tethering plate and housed in our waterproof 1535 DigiCase Pro, the 1535 Pro Ultra Kit is in a league of its own. There is no other 1-case solution in the marketplace that gives you the ability to travel with both a full DSLR camera setup and laptop computer system.

Kit Includes: 1535 DigiCase Pro with TrekPak | DigiPlate Pro | DigiClamps – Laptop Universal | DigiClamps – Accessory Universal | DigiShade Pro | DigiMouse Pad | DigiLegs | DigiBase.

Buy
Details
Add to cart
View details  
Inovativ Voyager Travel Case
From $490.00
Product available for orders

INOVATIV’s Voyager Travel Case is a must have if you plan on flying with your Voyager. It will protect the cart and most importantly, the aluminum dovetail system from scratches and small dings. However, this is a soft case and is not impact resistant. The case has a shipping label pocket on the front and business card pocket on the side, plus two heavy duty lifting handles to make transporting easier.

Details
View details  
Inovativ Dolly Handles for Echo
$270.00
Special order

Echo Users: Dolly Handles connect to the Accessory Channel Blocks on the Echo. They add an additional position for lifting your cart up and over curbs, stairways, truck beds, etc. Keep in mind, if you currently use your Accessory Channel Blocks for other accessories, you will need to swap accessories when needed.

Kit Includes: Pair Dolly Handles, Pair Channel Block Spikes, Adjustable Locking Levers, Mounting Hardware

Note : Handles specific to the Echo

Buy
Details
Add to cart
View details  
Inovativ 5/8 Baby Pin Mast Adaptor
$340.00
Special order

Add a 5/8 In. baby pin to any existing 1.75″ Aluminum Mast found in our camera mount or tripod systems with our 5/8 Baby Mast Adapter. This simple upgrade attaches a height adjustable 5/8 baby pin on the top of the 1.75″ Aluminum Mast.

Requires: 1.75 In. Mast

Kit Includes: Black Aluminum Collar, 2nd Stage Riser w/Spud Mount, Mounting Hardware.

*2nd stage riser ONLY. This item does NOT include a 1.75″ Aluminum Mast.

Buy
Details
Add to cart
View details  
Inovativ Hi-Hat Rails For Apollo
$120.00
Special order

The Hi-Hat Rails are designed to mount to the bottom shelf of both the Apollo 40 and 52 workstations. Installation is as easy as screwing in 6 bolts to the dedicated threaded holes located on the underside of the Apollo bottom shelf. The Hi-Hat board can be fed into the rails from both sides of the cart. The Hi-Hat rails are designed to work with standard Hi-Hat boards.

Kit Includes: Two Hi-Hat Rails, Mounting Hardware

Note, this accessory is only compatible with Apollo equipment carts.

Buy
Details
Add to cart
View details  
Inovativ Baby Pin Plug for Apollo, Deploy, & Center Mast Bracket

The Corner Plug with Baby Pin fits seamlessly into any of the 4 upright posts of the Apollo. Due to the Apollo’s Corner-Cam Lock System design, the Corner Plug fits into the top shelf corners, staying clear of the cart’s working area.

You can quickly mount a variety of items that have a 5/8 In. baby pin receiver. Coupled with the Digibase, this is also a very useful tool to mount our Digiplates, Pro Monitor Mounts, or even lights!

Note, this accessory is compatible only with Apollo, Deploy, & Center Mast Bracket.

Details
View details  
Inovativ Baby Pin System
$370.00
Availability 24h to 72h, subject to availability at the distributor.

This is a 5/8 In. Baby Pin System that clamps to any of the carts 4 upright post using our Overtube Style design, so you don’t have to remove the top shelf to install it. Mount anything up to 30 lbs in weight with a 5/8″ mount.

Compatible with our DigiBase and Pro Monitor Mount, you can secure our Digiplate Pro, any monitor with a VESA plate, even lights! Rods come in 33 In. length and are black anodized.

Kit Includes: Rod w/Spud Mount, Pair Baby Pin Clamps, Mounting Hardware.

Buy
Details
Add to cart
View details  
Inovativ Vest Rod for Readyrig or Walter Klassen Vest
$210.00
Special order

Use this accessory to mount anything from Steadicam and Pro vest’s to Ready-Rig’s and Walter Klassen gimbal support vests. The Vest Rod connects to any of the 4 upright posts on our workstations. It can both swivel 360 degrees and rise or fall on the upright tube.

Buy
Details
Add to cart
View details  
Inovativ Stand Hanger
From $91.00
Special order

The Stand Holder is designed to work with American Grip stands that have a Hanger Pin installed. However, this product works with most stand manufacturers that use Hanger Pins.

Kit Includes: Stand Holder and 3M Bumpon Adhesive Protective Tape

Details
View details  
Inovativ Cable Hooks
From $150.00
In stock

Because keeping your cables organized is critical, INOVATIV has created these multipurpose cable hangers to mount directly onto the INOVATIV Accessory Cross Bar. Kit Includes: Pair Cable Hooks, Mounting Hardware.

Details
View details