Active filters
The WorkSurface Pro is a one-of-a-kind workstation. Coupled with our unique and Patent Pending vDrop System, the WorkSurface Pro can be mounted to pole that is up to 2 In. in diameter.
All WorkSurface Pro Kits Include: WorkSurface Pro | vDrop Mount | 2 Convi Clamps
The Easy Release Plate is compatible with the DigiCase Mount, DigiPlate Pro and DigiPlate Lite. This is the same plate that comes with the DigiCase Mount kit. Extra ERP’s come in handy to keep different mounts at the ready so switching from a tripod to a c-stand can be done in a few seconds. The 2016 ERP has been redesigned to work seamlessly with Arca Swiss style tripod heads.
Kit Includes: Easy Release Plate, (2) 3/8-16 In. Stainless Steel Thumbscrews, and (1) 3/8-16 Flat Head Allen Bolt.
The DigiCamera Plate attaches to the bottom of the camera and uses a friction system to keep tether cables from pulling out the dainty connectors that most tether cables are equipped with. The friction system is so effective, you can actually carry the camera around by the tether cable.
Do you want to mount your iMac to your DigiPlate Pro? The DigiBar secures your iMac or Cinema Display to the DigiPlate Pro. Combine that with a DigiBase, and you can mount it all on a rolling stand or workstation.
Kit Includes: DigiBar | 2 Thumbscrews | Mounting Instructions
Not compatible with the DigiPlate Lite.
The DigiBracket connects the DigiPlate Pro and DigiPlate Lite directly to the legs of your tripod. Machined from strong and lightweight 6061 aluminum, the bracket keeps your laptop secured and close to camera when you are working solo.
Kit Includes: DigiBracket | One 3/8-16 x 0.5 In. Socket Cap Screw | 2 Pieces of 2 In. x 10.5 In. Black Gaffer’s Tape
The DigiPlate Pro is the foundation of all DigiSystem products. It is based on the tried and true “cheese plate” design used by professional photographers and cinematographers. With 161 holes tapped with the very common 3/8-16 thread size, the DigiPlate Pro is virtually limitless when it comes to expandability. All accessories are sold separately or by the kit. The DigiPlate Pro comes with one 3/8-16 to 1/4-20 step-down bushing to work seamlessly with tripods or tripod plates that use a 1/4-20 sized bolt.
Kit Includes: DigiPlate Pro | 3/8-16 to 1/4-20 step-down bushing | Instructions
The Ultimate Mobile Digital Tech Package for Tethering, Data Management, Laptop and Equipment Storage.
The 1535 Pro Ultra Kit is a portable and ruggedized digital photographic workstation that is configured with our top-tier DigiSystem products. Based on the DigiPlate Pro tethering plate and housed in our waterproof 1535 DigiCase Pro, the 1535 Pro Ultra Kit is in a league of its own. There is no other 1-case solution in the marketplace that gives you the ability to travel with both a full DSLR camera setup and laptop computer system.
Kit Includes: 1535 DigiCase Pro with TrekPak | DigiPlate Pro | DigiClamps – Laptop Universal | DigiClamps – Accessory Universal | DigiShade Pro | DigiMouse Pad | DigiLegs | DigiBase.
INOVATIV’s Voyager Travel Case is a must have if you plan on flying with your Voyager. It will protect the cart and most importantly, the aluminum dovetail system from scratches and small dings. However, this is a soft case and is not impact resistant. The case has a shipping label pocket on the front and business card pocket on the side, plus two heavy duty lifting handles to make transporting easier.
Echo Users: Dolly Handles connect to the Accessory Channel Blocks on the Echo. They add an additional position for lifting your cart up and over curbs, stairways, truck beds, etc. Keep in mind, if you currently use your Accessory Channel Blocks for other accessories, you will need to swap accessories when needed.
Kit Includes: Pair Dolly Handles, Pair Channel Block Spikes, Adjustable Locking Levers, Mounting Hardware
Note : Handles specific to the Echo
Add a 5/8 In. baby pin to any existing 1.75″ Aluminum Mast found in our camera mount or tripod systems with our 5/8 Baby Mast Adapter. This simple upgrade attaches a height adjustable 5/8 baby pin on the top of the 1.75″ Aluminum Mast.
Requires: 1.75 In. Mast
Kit Includes: Black Aluminum Collar, 2nd Stage Riser w/Spud Mount, Mounting Hardware.
*2nd stage riser ONLY. This item does NOT include a 1.75″ Aluminum Mast.
The Hi-Hat Rails are designed to mount to the bottom shelf of both the Apollo 40 and 52 workstations. Installation is as easy as screwing in 6 bolts to the dedicated threaded holes located on the underside of the Apollo bottom shelf. The Hi-Hat board can be fed into the rails from both sides of the cart. The Hi-Hat rails are designed to work with standard Hi-Hat boards.
Kit Includes: Two Hi-Hat Rails, Mounting Hardware
Note, this accessory is only compatible with Apollo equipment carts.
The Corner Plug with Baby Pin fits seamlessly into any of the 4 upright posts of the Apollo. Due to the Apollo’s Corner-Cam Lock System design, the Corner Plug fits into the top shelf corners, staying clear of the cart’s working area.
You can quickly mount a variety of items that have a 5/8 In. baby pin receiver. Coupled with the Digibase, this is also a very useful tool to mount our Digiplates, Pro Monitor Mounts, or even lights!
Note, this accessory is compatible only with Apollo, Deploy, & Center Mast Bracket.
