Cameras and peripherals

Active filters

  • Categories: Cart workstations accessories
  • Categories: Readers and memory cards
From $490.00
Product available for orders

INOVATIV’s Voyager Travel Case is a must have if you plan on flying with your Voyager. It will protect the cart and most importantly, the aluminum dovetail system from scratches and small dings. However, this is a soft case and is not impact resistant. The case has a shipping label pocket on the front and business card pocket on the side, plus two heavy duty lifting handles to make transporting easier.

$270.00
Special order

Echo Users: Dolly Handles connect to the Accessory Channel Blocks on the Echo. They add an additional position for lifting your cart up and over curbs, stairways, truck beds, etc. Keep in mind, if you currently use your Accessory Channel Blocks for other accessories, you will need to swap accessories when needed.

Kit Includes: Pair Dolly Handles, Pair Channel Block Spikes, Adjustable Locking Levers, Mounting Hardware

Note : Handles specific to the Echo

$340.00
Special order

Add a 5/8 In. baby pin to any existing 1.75″ Aluminum Mast found in our camera mount or tripod systems with our 5/8 Baby Mast Adapter. This simple upgrade attaches a height adjustable 5/8 baby pin on the top of the 1.75″ Aluminum Mast.

Requires: 1.75 In. Mast

Kit Includes: Black Aluminum Collar, 2nd Stage Riser w/Spud Mount, Mounting Hardware.

*2nd stage riser ONLY. This item does NOT include a 1.75″ Aluminum Mast.

$120.00
Special order

The Hi-Hat Rails are designed to mount to the bottom shelf of both the Apollo 40 and 52 workstations. Installation is as easy as screwing in 6 bolts to the dedicated threaded holes located on the underside of the Apollo bottom shelf. The Hi-Hat board can be fed into the rails from both sides of the cart. The Hi-Hat rails are designed to work with standard Hi-Hat boards.

Kit Includes: Two Hi-Hat Rails, Mounting Hardware

Note, this accessory is only compatible with Apollo equipment carts.

The Corner Plug with Baby Pin fits seamlessly into any of the 4 upright posts of the Apollo. Due to the Apollo’s Corner-Cam Lock System design, the Corner Plug fits into the top shelf corners, staying clear of the cart’s working area.

You can quickly mount a variety of items that have a 5/8 In. baby pin receiver. Coupled with the Digibase, this is also a very useful tool to mount our Digiplates, Pro Monitor Mounts, or even lights!

Note, this accessory is compatible only with Apollo, Deploy, & Center Mast Bracket.

$370.00
Availability 24h to 72h, subject to availability at the distributor.

This is a 5/8 In. Baby Pin System that clamps to any of the carts 4 upright post using our Overtube Style design, so you don’t have to remove the top shelf to install it. Mount anything up to 30 lbs in weight with a 5/8″ mount.

Compatible with our DigiBase and Pro Monitor Mount, you can secure our Digiplate Pro, any monitor with a VESA plate, even lights! Rods come in 33 In. length and are black anodized.

Kit Includes: Rod w/Spud Mount, Pair Baby Pin Clamps, Mounting Hardware.

$210.00
Special order

Use this accessory to mount anything from Steadicam and Pro vest’s to Ready-Rig’s and Walter Klassen gimbal support vests. The Vest Rod connects to any of the 4 upright posts on our workstations. It can both swivel 360 degrees and rise or fall on the upright tube.

From $91.00
Special order

The Stand Holder is designed to work with American Grip stands that have a Hanger Pin installed. However, this product works with most stand manufacturers that use Hanger Pins.

Kit Includes: Stand Holder and 3M Bumpon Adhesive Protective Tape

From $150.00
In stock

Because keeping your cables organized is critical, INOVATIV has created these multipurpose cable hangers to mount directly onto the INOVATIV Accessory Cross Bar. Kit Includes: Pair Cable Hooks, Mounting Hardware.

From $195.00
Special order

Quick Grips: The Quick Grip uses a Lock-On type grip that slide from the top of the post. Installation requires removable of the top shelf. Overtube Quick Grips: Easily mount to any of the 4 upright posts of your INOVATIV cart without needing to remove the top shelf. Both styles provide both 360 degrees of rotation and height adjustability.

From $21.00
Special order

This system allows for users to install a mast with a 2-Stage 5/8 In. baby pin riser attachment to your workstation. Measuring 54 In. long at max extension, this accessory can be used to mount third party gimbal docks that use a 5/8 In. baby pin. Th default system for Echo workstations is configured to be mounted on the swivel wheel/narrow side of the cart. If you prefer otherwise, please specify what side of the cart you prefer the system to be mounted on. Compatible to both ends on The Apollo and The Voyager.

From $720.00
Special order

This system allows for users to install a mast with a 2-Stage 5/8 In. baby pin riser attachment to your workstation. Measuring 54 In. long at max extension, this accessory can be used to mount third party gimbal docks that use a 5/8 In. baby pin. Th default system for Echo workstations is configured to be mounted on the swivel wheel/narrow side of the cart. If you prefer otherwise, please specify what side of the cart you prefer the system to be mounted on. Compatible to both ends on The Apollo and The Voyager.