List of products by brand INOVATIV

The Mantis 30 is revolutionizing the way we move and use larger multimedia displays. Our gas cylinder and braking system work together to insure your monitor moves smoothly with finger tip control and it stays where you leave it.

We have used only the highest quality materials and CNC technology to provide you with a perfectly engineered masterpiece that will last a lifetime. This arm works magically with large PC monitors, Apple displays and iMac computers. The Mantis 30 system mounts to any INOVATIV cart using the Monitor Arm Clamps included in the kit.

Kit Includes: Mantis 30 Gas Cylinder Arm, Vesa Head Plate, 800mm 2 Part Post, Pair Monitor Arm Clamps, Mounting Hardware.

The BOA Monitor Mount System comes with a factory pre-tensioned articulated head, making it easy to move large monitors, or even large computers like the 27 In. iMac, to a proper ergonomic location.

The BOA system mounts to any INOVATIV cart using the Monitor Arm Clamps included in the system. Once the system is mounted, the BOA arm will rise and fall effortlessly on the mast to accommodate different eye heights, along with rotating and articulating the monitor in different positions.

The Insight’s Baby Pin Attachment connects to the Insight’s System Bracket. The height position may be adjusted on the 6 threaded holes of the System Bracket.

The baby pin is commonly utilized to wireless receivers, wireless transmitters, antennas and other accessories that connect to a baby pin.

Kit Includes: Baby Pin Attachment, Baby Pin with ⅜ In. thread, Mounting Hardware

INOVATIV’s Voyager Travel Case is a must have if you plan on flying with your Voyager. It will protect the cart and most importantly, the aluminum dovetail system from scratches and small dings. However, this is a soft case and is not impact resistant. The case has a shipping label pocket on the front and business card pocket on the side, plus two heavy duty lifting handles to make transporting easier.

Echo Users: Dolly Handles connect to the Accessory Channel Blocks on the Echo. They add an additional position for lifting your cart up and over curbs, stairways, truck beds, etc. Keep in mind, if you currently use your Accessory Channel Blocks for other accessories, you will need to swap accessories when needed.

Kit Includes: Pair Dolly Handles, Pair Channel Block Spikes, Adjustable Locking Levers, Mounting Hardware

Note : Handles specific to the Echo

Add a 5/8 In. baby pin to any existing 1.75″ Aluminum Mast found in our camera mount or tripod systems with our 5/8 Baby Mast Adapter. This simple upgrade attaches a height adjustable 5/8 baby pin on the top of the 1.75″ Aluminum Mast.

Requires: 1.75 In. Mast

Kit Includes: Black Aluminum Collar, 2nd Stage Riser w/Spud Mount, Mounting Hardware.

*2nd stage riser ONLY. This item does NOT include a 1.75″ Aluminum Mast.

We’ve designed this system based on the needs of Steadicam Operators around the globe. Complete with a 1.75 In. mast, bumper, bottom receiver, 1.75 In. accessory crossbar clamp(s), and adjustable vest mount. Default system for The Echo workstation is configured to be mounted on the swivel wheel / narrow side of the cart. If you prefer otherwise, please specify what side of the cart you prefer the system to be mounted on. Compatible to both ends on Apollo/Voyager workstations.

This system allows for users to install a mast with a 2-Stage 5/8 In. baby pin riser attachment to your workstation. Measuring 54 In. long at max extension, this accessory can be used to mount third party gimbal docks that use a 5/8 In. baby pin. Th default system for Echo workstations is configured to be mounted on the swivel wheel/narrow side of the cart. If you prefer otherwise, please specify what side of the cart you prefer the system to be mounted on. Compatible to both ends on The Apollo and The Voyager.

The Hi-Hat Rails are designed to mount to the bottom shelf of both the Apollo 40 and 52 workstations. Installation is as easy as screwing in 6 bolts to the dedicated threaded holes located on the underside of the Apollo bottom shelf. The Hi-Hat board can be fed into the rails from both sides of the cart. The Hi-Hat rails are designed to work with standard Hi-Hat boards.

Kit Includes: Two Hi-Hat Rails, Mounting Hardware

Note, this accessory is only compatible with Apollo equipment carts.

The Corner Plug with Baby Pin fits seamlessly into any of the 4 upright posts of the Apollo. Due to the Apollo’s Corner-Cam Lock System design, the Corner Plug fits into the top shelf corners, staying clear of the cart’s working area.

You can quickly mount a variety of items that have a 5/8 In. baby pin receiver. Coupled with the Digibase, this is also a very useful tool to mount our Digiplates, Pro Monitor Mounts, or even lights!

Note, this accessory is compatible only with Apollo, Deploy, & Center Mast Bracket.

The Horseshoe Mount allows users to add another camera mount on any existing 1.75 In. mast. So whether it is being added to a tripod system or as an additional camera docking station to an existing camera mount system, you can secure your camera and keep it safe with this innovative accessory.

Kit Includes: Horseshoe Mount and Mounting Hardware

This is a 5/8 In. Baby Pin System that clamps to any of the carts 4 upright post using our Overtube Style design, so you don’t have to remove the top shelf to install it. Mount anything up to 30 lbs in weight with a 5/8″ mount.

Compatible with our DigiBase and Pro Monitor Mount, you can secure our Digiplate Pro, any monitor with a VESA plate, even lights! Rods come in 33 In. length and are black anodized.

Kit Includes: Rod w/Spud Mount, Pair Baby Pin Clamps, Mounting Hardware.