List of products by brand INOVATIV

Crossbars come standard with all INOVATIV Workstations. If you need a replacement, or want to double up on your crossbars, you’re in the right place.

Do you want to mount your iMac to your DigiPlate Pro? The DigiBar secures your iMac or Cinema Display to the DigiPlate Pro. Combine that with a DigiBase, and you can mount it all on a rolling stand or workstation.

Kit Includes: DigiBar | 2 Thumbscrews | Mounting Instructions

Not compatible with the DigiPlate Lite.

The DigiBracket connects the DigiPlate Pro and DigiPlate Lite directly to the legs of your tripod. Machined from strong and lightweight 6061 aluminum, the bracket keeps your laptop secured and close to camera when you are working solo.

Kit Includes: DigiBracket | One 3/8-16 x 0.5 In. Socket Cap Screw | 2 Pieces of 2 In. x 10.5 In. Black Gaffer’s Tape

The DigiCamera Plate attaches to the bottom of the camera and uses a friction system to keep tether cables from pulling out the dainty connectors that most tether cables are equipped with. The friction system is so effective, you can actually carry the camera around by the tether cable.

The DigiPlate Pro is the foundation of all DigiSystem products. It is based on the tried and true “cheese plate” design used by professional photographers and cinematographers. With 161 holes tapped with the very common 3/8-16 thread size, the DigiPlate Pro is virtually limitless when it comes to expandability. All accessories are sold separately or by the kit. The DigiPlate Pro comes with one 3/8-16 to 1/4-20 step-down bushing to work seamlessly with tripods or tripod plates that use a 1/4-20 sized bolt.

Kit Includes: DigiPlate Pro | 3/8-16 to 1/4-20 step-down bushing | Instructions

Echo Users: Dolly Handles connect to the Accessory Channel Blocks on the Echo. They add an additional position for lifting your cart up and over curbs, stairways, truck beds, etc. Keep in mind, if you currently use your Accessory Channel Blocks for other accessories, you will need to swap accessories when needed.

Kit Includes: Pair Dolly Handles, Pair Channel Block Spikes, Adjustable Locking Levers, Mounting Hardware

Note : Handles specific to the Echo

The AXIS Drawer can be connected to either the Case Platform or Digi Platform. Measuring in at 20.5 In. W x 12 In. L x 4 In. H, the drawer provides 960 cubic inches of storage space. Outfitted with a three-digit combination lock, self-closing drawer slides, and black outdoor marine carpet.

Kit Includes: Drawer | Mounting Hardware

The Easy Release Plate is compatible with the DigiCase Mount, DigiPlate Pro and DigiPlate Lite. This is the same plate that comes with the DigiCase Mount kit. Extra ERP’s come in handy to keep different mounts at the ready so switching from a tripod to a c-stand can be done in a few seconds. The 2016 ERP has been redesigned to work seamlessly with Arca Swiss style tripod heads.

Kit Includes: Easy Release Plate, (2) 3/8-16 In. Stainless Steel Thumbscrews, and (1) 3/8-16 Flat Head Allen Bolt.

The Echo incorporates our patented tool-less packable design, and is equipped with our SLAS height adjustable top shelf, keyboard accessible 3-sided top shelf, and comes standard with a combo locking top and bottom drawer!

The Hi-Hat Rails are designed to mount to the bottom shelf of both the Apollo 40 and 52 workstations. Installation is as easy as screwing in 6 bolts to the dedicated threaded holes located on the underside of the Apollo bottom shelf. The Hi-Hat board can be fed into the rails from both sides of the cart. The Hi-Hat rails are designed to work with standard Hi-Hat boards.

Kit Includes: Two Hi-Hat Rails, Mounting Hardware

Note, this accessory is only compatible with Apollo equipment carts.

The Horseshoe Mount allows users to add another camera mount on any existing 1.75 In. mast. So whether it is being added to a tripod system or as an additional camera docking station to an existing camera mount system, you can secure your camera and keep it safe with this innovative accessory.

Kit Includes: Horseshoe Mount and Mounting Hardware

The Mantis 30 is revolutionizing the way we move and use larger multimedia displays. Our gas cylinder and braking system work together to insure your monitor moves smoothly with finger tip control and it stays where you leave it.

We have used only the highest quality materials and CNC technology to provide you with a perfectly engineered masterpiece that will last a lifetime. This arm works magically with large PC monitors, Apple displays and iMac computers. The Mantis 30 system mounts to any INOVATIV cart using the Monitor Arm Clamps included in the kit.

Kit Includes: Mantis 30 Gas Cylinder Arm, Vesa Head Plate, 800mm 2 Part Post, Pair Monitor Arm Clamps, Mounting Hardware.